home .. forth .. misc mail list archive ..

Technology Overview


More  interesting  stuff for Chuck,  Jeff.  Most of these night be able
to be used on bigger (OEM) commisioned  drsigns in future.

Take any gap in the text as a likely snip of the original text.

http://www.peregrine-semi.com/tech/default.html:
Radiation-Hardened ASICs 
       UTSiŽ Technology Overview


 Compared to standard CMOS technologies, Peregrine Semiconductor Corp.'s
 patented, proprietary UTSi (Ultra-Thin-Silicon) CMOS process offers
advantages
 in speed, circuit density, and power consumption. However, its most
significant
 advantage is its superior ability to combine microwave, analog, and
digital functions
 onto a single chip.

 The UTSi process is a silicon-on-insulator (SOI) technology. With SOI
 technologies, circuits are fabricated in a very thin layer of silicon
on an insulating
 substrate, or in a thin silicon layer that is electrically insulated
from a solid silicon
 substrate.

 Conventional CMOS processes build circuits on silicon wafers about 500
microns
 thick, but all the circuitry is actually formed in a 1 micron layer at
the surface. These
 standard silicon devices are far from ideal - the circuits interact
with the conductive
 silicon substrate, causing many parasitic effects. In particular,
capacitance between
 the circuitry and the substrate causes power consumption to increase
with switching
 speed and creates undesirable coupling between circuits. The bulk
substrate's
 dispersion of high-frequency signals precludes the construction of
microwave
 devices. These effects become more pronounced as advances in
manufacturing
 technology lead to smaller transistor dimensions and lower operating
voltages. This
 has caused some technologists to assert that integrating all the
functions necessary
 for future wireless communications devices onto a single chip will
require a new
 technology.

 If transistors could be fabricated in a very thin layer of silicon on
an electrically
 insulating substrate, nearly ideal devices could be realized. This is
the reason for the
 recent surge of interest in SOI technologies. Submicron transistors
require very

 While SOS has been proven manufacturable and has significant
performance
 advantages, it has seen little commercial use, mainly because SOS has
been
 unsuitable to the fabrication of the very small transistors needed for
modern,
 high-density circuits.

 The ideal solution would be an extremely thin, high-quality silicon
film on a thick,
 electrically nonconductive (but thermally conductive) substrate. This
is what UTSi
 technology offers. Peregrine's UTSi process begins with a conventional
SOS wafer.
 with a low defect density. UTSi wafers can be processed on existing
CMOS

 fabrication lines with minimal changes to the standard process and
fewer
 yield-limiting steps. Circuit design is easier as well, since the UTSi
process is
 essentially standard CMOS without many of the parasitic effects
inherent in bulk
 silicon processes. Higher packing densities and improved yields offset
the cost of
 the sapphire substrate, making UTSi components cost-competitive.

 Peregrine has demonstrated a field-programmable gate array, a 64-kb
SRAM, a
 2.5-GHz frequency synthesizer, and various microwave devices in its
UTSi CMOS
 technology. The microwave devices were fabricated on the same die as
the
 SRAM, demonstrating the ability of the UTSi process to combine
sensitive analog


http://www.lsilogic.com/mediakit/pr0051.html:

              Both companies intend to develop combined integrated
              logic/DRAM chips with up to 128 Meg of memory and
              8.1-million logic gates.

              Milpitas, CA, and Boise, ID, June 2, 1997 -- LSI Logic
Corporation and Micron
              Technology, Inc., today announced an embedded DRAM
technology development alliance.
              The companies intend to develop and produce digital logic
integrated circuits that also will have
              the capability of embedding from 64 to 128 Meg of
conventional DRAM on a single chip.

Apart  from this I read an article  in New Scientist about Silicon
Carbide.  Aparently resistant to 2000C, has it  over  Silicon s far  as 
signal quality, capable of generating Microwaves  off  chip, and now
cost effective to make.

Wayne.
Title: Technology Overview
Technology


Technology Overview | RF Integration | PE3282 PLL | UTSi Custom Development | Radiation-Hardened ASICs

UTSi® Technology Overview


Compared to standard CMOS technologies, Peregrine Semiconductor Corp.'s patented, proprietary UTSi (Ultra-Thin-Silicon) CMOS process offers advantages in speed, circuit density, and power consumption. However, its most significant advantage is its superior ability to combine microwave, analog, and digital functions onto a single chip.

The UTSi process is a silicon-on-insulator (SOI) technology. With SOI technologies, circuits are fabricated in a very thin layer of silicon on an insulating substrate, or in a thin silicon layer that is electrically insulated from a solid silicon substrate.

Today's complex integrated circuits are fabricated almost exclusively in CMOS on standard silicon substrates. The availability of inexpensive, high-quality silicon wafers and an enormous pool of manufacturing experience, favor standard CMOS for most applications. However, the migration toward smaller transistor dimensions, the need to decrease power dissipation, and a desire to combine sensitive analog circuits with complex digital circuits - particularly in communications applications - is spurring interest in alternatives to standard silicon technology.

Conventional CMOS processes build circuits on silicon wafers about 500 microns thick, but all the circuitry is actually formed in a 1 micron layer at the surface. These standard silicon devices are far from ideal - the circuits interact with the conductive silicon substrate, causing many parasitic effects. In particular, capacitance between the circuitry and the substrate causes power consumption to increase with switching speed and creates undesirable coupling between circuits. The bulk substrate's dispersion of high-frequency signals precludes the construction of microwave devices. These effects become more pronounced as advances in manufacturing technology lead to smaller transistor dimensions and lower operating voltages. This has caused some technologists to assert that integrating all the functions necessary for future wireless communications devices onto a single chip will require a new technology.

Gallium arsenide (GaAs), the most mature alternative material technology, may be more suitable than standard silicon CMOS for some high-frequency devices, but it is not useful for very large digital circuits. In spite of its long history, GaAs still faces numerous manufacturing and device-physics challenges. More recently developed materials (silicon-germanium, silicon carbide) are probably many years away from being commercially viable. The most desirable solution to future design problems would be to continue using silicon. Silicon is unique- it is the only element with numerous physical properties that make it inherently suited to use in integrated circuits. The industry has an enormous investment in the design and manufacturing of silicon circuits. For some time to come, silicon will be the first choice, perhaps the only choice, for fabrication of complex ICs. It will be necessary, then, to eliminate as many undesirable bulk-silicon parasitic effects as possible.

If transistors could be fabricated in a very thin layer of silicon on an electrically insulating substrate, nearly ideal devices could be realized. This is the reason for the recent surge of interest in SOI technologies. Submicron transistors require very high-quality silicon, but there are substantial difficulties in obtaining a defect-free silicon film on an insulating substrate. The most mature SOI process is silicon-on-sapphire (SOS), in which a thin film of silicon is grown on a sapphire wafer. SOS is an established technology used primarily in military and space applications, where its inherent resistance to the effects of radiation is essential. While SOS has been proven manufacturable and has significant performance advantages, it has seen little commercial use, mainly because SOS has been unsuitable to the fabrication of the very small transistors needed for modern, high-density circuits.

When silicon is grown on a sapphire substrate, differences in the crystal lattice dimensions of the sapphire and silicon cause the silicon to form with many microscopic dislocations. These dislocations, which are more numerous near the silicon-sapphire interface, interfere with the movement of electrons through the silicon. The concentration of defects near the interface effectively prevents the use of the very thin silicon films necessary for deep-submicron transistors.

One cumbersome alternative to using a sapphire substrate is to produce a thin silicon layer on top of a silicon-dioxide layer on a bulk silicon substrate. Two of the more successful methods used for this type of SOI are wafer bonding and SIMOX (Separation by IMplanted OXygen). Since single-crystal silicon cannot be grown on amorphous silicon dioxide, both methods seek to insert an insulating oxide layer between existing layers of silicon. Both processes are complicated, time consuming, and costly.

In the wafer bonding process, two oxidized bulk wafers are bonded together. Polishing or etching the top wafer leaves a thin layer of silicon supported by the bottom wafer but insulated from it by an oxide layer. This is mechanically a difficult process, requiring extremely clean wafer surfaces to prevent voids. Doping procedures used to control the etching of the thick upper wafer increase the defect density in the final silicon layer. This technique is most appropriate in applications that require thicker silicon and silicon dioxide layers.

In a very different procedure, the SIMOX process implants oxygen atoms just beneath the wafer's surface, creating a thin, buried layer of silicon dioxide. High implant energies and multiple implant-and-anneal cycles are required, since the implantation process severely damages the silicon overlayer.

SIMOX and other Si/SiO2/Si technologies may enable the fabrication of smaller transistors by providing a thin layer of silicon, but there are compromises in performance. Because silicon dioxide is a poor thermal conductor, that layer must be kept very thin. Still, self-heating effects degrade transistor performance in SIMOX devices. Also, the circuitry, although electrically insulated from the conductive silicon below, is close to it and remains subject to many of the parasitic effects seen in conventional bulk-silicon circuits. High-frequency dispersion losses, for example, persist.

The ideal solution would be an extremely thin, high-quality silicon film on a thick, electrically nonconductive (but thermally conductive) substrate. This is what UTSi technology offers. Peregrine's UTSi process begins with a conventional SOS wafer. The silicon film is improved through a series of ion-implantation and annealing steps, then thinned by oxidizing and etching. The result is an ultra-thin (0.1- micron) film with a low defect density. UTSi wafers can be processed on existing CMOS fabrication lines with minimal changes to the standard process and fewer yield-limiting steps. Circuit design is easier as well, since the UTSi process is essentially standard CMOS without many of the parasitic effects inherent in bulk silicon processes. Higher packing densities and improved yields offset the cost of the sapphire substrate, making UTSi components cost-competitive.

Peregrine has demonstrated a field-programmable gate array, a 64-kb SRAM, a 2.5-GHz frequency synthesizer, and various microwave devices in its UTSi CMOS technology. The microwave devices were fabricated on the same die as the SRAM, demonstrating the ability of the UTSi process to combine sensitive analog devices and large, high-speed digital devices in a single process. UTSi circuits exhibit many characteristics of an ideal SOI process: higher speed, lower power consumption, inherent isolation between circuits, and improved yield.

Of the various SOI technologies being investigated by commercial IC manufacturers, UTSi technology is the most promising for implementing highly integrated, multiple-function, low-power ICs. Such ICs will be needed for the wireless communications market to develop to its full potential. Peregrine Semiconductor Corp. is currently the only company dedicated to the development of commercial IC products in this technology.

This site may require Internet Explorer Products which you are able to download now. You may also download Netscape Products to better view this site. Data sheets, manuals and other large documents are available to view in PDF format. In order to view these documents in PDF format, you will need Adobe's Acrobat Viewer. You may download the Adobe Acrobat Free Reader here.

Peregrine, Peregrine Semiconductor Corp., UTSi, and logo are all registered trademarks of Peregrine Semiconductor Corp.
Peregrine Semiconductor Corp., 6175 Nancy Ridge Drive, San Diego, CA 92121, (619) 455-0660, Fax (619) 455-0770