home .. forth .. colorforth mail list archive ..

[ColorForth] Success/Failure report


Hello!

Finally I got colorforth working, and did my first stumbling '3 4 +'es

I used  c4-800x600-p2bd-03.zip, that is: 800x600 resolution and
non-DMA floppy access.

The computer is a Compaq Presario 1680 Notebook (with the left display-base
broken ;-(

It uses a Mobile Pentium MMX at 200Mhz, with 64 MByte Ram.

Chipset PIIX4 revision 1 (8086/7110)

Floppy Controller is a post-1991 82077

Video Chipset Neomagic Magic Graph 128XD (NM2160), 2 MByte Video Ram,
with a 800x600 color TFT display and VESA VBE 2.0 Bios by Neomagic.

--------------------------------------------
Now some notes an computers I had no success:

Homebrew - toa:
- Biostar Motherboard
- Pentium III (Coppermine) 750 Mhz, 192MByte Ram
- PCI bridge: Intel Corp. 82801AA
- Floppy-Controller: post-1991 82077
- VGA: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 03)
  Chipset: "i810"
- VESA VBE Version 2.0: Intel810(TM) Graphics Chip Accelerated VGA BIOS

Symptom: Black Monitor, re-initializes periodically.
---------------------------------------
Homebrew - octopus:
- 
- Pentium P54C, 75 - 200, 200Mhz, 64MByte Ram
- VGA: Sis 6326, Silicon Integrated Systems [SiS] 86C326 (rev 0b)
- VESA VBE Version 2.0
- Floppy: is a post-1991 82077
- Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 01)

Symptom: Black Monitor, freezes after loading some (all?) blocks from
floppy.
---------------------------------------

Homebrew - tritri:

- Lousy motherboard (Xcell 2000)
- Pentium MMX, 200 MHz, 92MByte Ram
- Host bridge: Silicon Integrated Systems [SiS] 5597 [SiS5582] (rev 02)
- VGA: Silicon Integrated Systems [SiS] 5597/5598 VGA (rev 65)
- VESA VBE Version 2.0, 4MByte Ram
- Floppy: is an 8272A

Symptom: Loads one track and freezes, black display.
-----------------------------------------------

Toshiba 200CDT Notebook, 40MByte Ram, Pentium 100MHz.

Symptom: Loads one track and freezes, black display.

Note that both notebooks showed colored stripes at the top of the
display with the DMA-Floppy Driver version, then they went black and
freezed (IIRC).

------------------------------------------------

Homebrew - kumi:

- Celeron 800MHz, 128 MByte Ram,
- SiS 630 Chipset VGA/PCI
- Floppy: is a post-1991 82077

Symptom: Black Monitor, freezes after loading some (all?) blocks from
floppy.


Best Regards,

     Jorge-León
------------------------

To Unsubscribe from this list, send mail to Mdaemon@xxxxxxxxxxxxxxxxxx with:
unsubscribe ColorForth
as the first and only line within the message body
Problems   -   List-Admin@xxxxxxxxxxxxxxxxxx
Main ColorForth site   -   http://www.colorforth.com
Wiki page http://kristopherjohnson.net/wiki/ColorForth
ColorForth index http://www.users.qwest.net/~loveall/c4index.htm